Home > News > Industry information >

The reason of the cable emit heat during operation
Industry information

2018-11-28Industry information游客:105

1. The cable conductor resistance does not meet the requirements, causing the cable to generate heat during operation.
2. The cable selection type is improper, causing the conductor cross section of the cable to be used to be too small, and an overload phenomenon occurs during operation. After a long time of use, the heat generation and heat dissipation of the cable are unbalanced to cause heat generation.
3. When the cable is installed, the arrangement is too dense, the ventilation and heat dissipation effect is not good, or the cable is too close to other heat sources, which affects the normal heat dissipation of the cable, and may also cause the cable to generate heat during operation.
4. The joint manufacturing technology is not good, the crimping is not tight, and the contact resistance at the joint is too large, which may cause the cable to generate heat.
5. The insulation between the phases of the cable is not good, resulting in a small insulation resistance and heat generation during operation.
6. The partial sheath of the armored cable is damaged. After the water enters, the insulation performance will be slowly destructive, resulting in a gradual decrease in the insulation resistance, which will also cause heating in the cable operation.

Yangzhou Fongming Cable Factory, the cable expert around you.

return >>